Select the card terminal model you have below and follow the relevant steps to change your Wi-Fi.
Change Wi-Fi on a V400m / e285 card terminal
- From the main screen, press 1 followed by the green circle button on your card terminal.
- Access the Staff menu using the PIN code 1234 followed by the green circle button.
- Go to Network and select Wi-Fi (make sure Wi-Fi toggle is turned ON).
- Select the new Wi-Fi network you’d like to join.
- Enter the Wi-Fi password followed by the green circle button.
- Tap the check mark to confirm.
- Within a few minutes, a Wi-Fi icon and cloud icon will appear at the top of the display.
NOTE: Always check if the Wi-Fi router has enough IP addresses available to connect.
Change Wi-Fi on a Fresha S1 card terminal
- From the main screen, tap on the Settings option.
- Select Network.
- Access the Admin menu using the PIN code 5358.
- Tap Wi-Fi and then the gear icon.
- Tap Forget.
- Select the new Wi-Fi network you’d like to join.
- Enter the Wi-Fi password and tap Connect.
- Within a few minutes, a Wi-Fi icon and cloud icon will appear at the top of the display.
NOTE: Check that your Wi-Fi is working with other devices such as your phone or laptop. If the Wi-Fi router doesn’t work properly with a different device, get in touch with your internet provider to look into this further.
